Controller Features:

1. Automatically run when power enough or tank is not full. Automatically off when tank is full.
2. High waterproof grade: IP65, double seal effect in waterproof and leak-proof
3. Soft start technology: No impulse current, longer life for the pump motor.
4. High voltage/Low voltage/Over-current/High temperature protection
5. 1 years warranty. 

IMPORTANT: DO NOT JUDGE PUMPS BASED ON HORSE POWER!

What We Get For You (Package Include):

 – 1 x  3″ DC solar Pump with 2m cable 

 – 1 x   Pump controller with MPPT function

 – 1 x  Stainless steel float switch (sensor for the tank)

 – 1 x  Pump outlet joint connector

 – 1 x  Splice kit for cable join

 – 1 x  Splice kit for waterproof

What You Need To Get By Yourself (Package DO NOT Include):

  – Suitable solar panels. There’re some suggestions in the instruction book.

  – A stainless steel wire ( called safety cable) to hold the pump in the bore. If pumping water from dam or river, a float set up required.

  – A poly pipe from pump to the water tank.

  – Wire power cable (3 wires plus earth). we recommend cable size at least thicker than the original cable in the pump.